Cold Room Single Wing Service Door
Produced in conformity with cold room and freezer room conditions.It conforms to European Union norms and manufactured with CE marking. We can produce custom Cold Room Single Wing Service Door with the specifications you need. Our Cold Room Single Wing Service Door highly insulated and comes with high quality parts.
- Environmentally Friendly
- Certified Products
- Energy Saving
- Does not contain carcinogenic material
- Can be used in health and food sector
Examine the Product in Detail
General Specifications
Technical Specifications
General Specifications
Used for fast transposition between storage areas. The door is produced with single wing and it can be mounted to the panel or wall. Thickness of wing is 40 mm and it can be opened 180 degrees in two apposite directions and can always stay be opened if required.
Technical Specifications
Anodized aluminium door frame can be applied onto panel or Wall. Our Access doors that have 40 mm leaf thickness have been fabricated by injecting 42 density polyurethane between Ral 9002 painted sheet metal and Cr-Ni, PVC coating two sheet metal.
Hinges on our doors that are produces by glassed-in and glassless are bi-directional and they provide to open on both side. Our special sealed door minimise the heat abductions in area transitions. There are polyurethane handle and Cr-Ni toe board against shocks. They can be fabricated as single leaf or double leaf according to project.
| Door Frame : | PVC-Aluminum |
| Frame Specifications : | Anodized Aluminum |
| Door Insulation Level : | 42-45gr/cm3 |
| Surface Materials Types : | Polyester-PVC-CrNi |
| Color : | RAL 9002 |
| Pattern : | Flat |
| Insulation : | Poliurethane |
| Sheet Thickness (mm) : | Interior 0,50 mm Exterior 0,50 mm |